GRAPHTEC MT100 User Manual page 73

Settings and Measurement
(6)-3 Between Cursors
This function allows you to save data between cursors, while replaying captured data.
Folder
File Name
File Type
Name Type
CHECKPOINT
• Data save between cursors can only be performed after you set the saving range with the cursor,
following captured data replay.
For details on data replay, see page 3-68.
CAUTION
• This menu is only enabled while data is replayed.
(6)-4 Save/Load Current Settings
This section allows you to save or load MT100's condition settings.
Folder
File Name
Name Type
(save only)
CAUTION
• This function is only enabled during Free Running.
3-34
Setting items
Specifies the location where data between cursors is saved.
MEM
USB1
Sets the file name when User is set for Name Type.
Specifies the file format used to save a file.
GBD
CSV
Specifies how files are named.
Auto
User
SN
Setting items
Specifies the location where condition settings are saved (or load source).
MEM
USB1
Save
Load
Specifies how files are named.
Auto
User
SN
Description
Saves data in the internal Flash memory.
Folders can be specified in File Operation settings.
Saves data in the USB memory.
Folders can be specified in FileOperation settings.
Creates data files in a proprietary binary format.
* Data cannot be altered.
Creates data files in text format.
* Cannot be replayed in MT100.
A file name is created automatically.
Specifies a user-defined name.
Creates a file by appending a serial number to the file name.
Description
Saves (loads) settings in the internal Flash memory.
Folders can be specified in File Operation settings.
Saves (loads) settings in the USB memory.
Folders can be specified in FileOperation settings.
Sets the file name when User is set for Name Type.
Specifies the settings file to load (file extension is CND).
A file name is created automatically.
Specifies a user-defined name.
Creates a file by appending a serial number to the file name.