GRAPHTEC MT100 User Manual page 68

Mountcorder
Hide thumbs Also See for MT100:
Table of Contents

Advertisement

(4)-1 Format Settings
This section allows you to set the format to display analog waveforms.
Setting items
Waveform Scroll
Direction
Number of Display
Zones
Compression
Magnification
Waveform Scroll Direction
<Waveform Scrolling Direction:Vertical>
Number of Display zones
<When set to 2 zone>
Compression Magnification
Sets the direction to scroll waveform display.
Vertical
Allows scrolling in the vertical direction (up to down).
Horizontal Allows scrolling in the horizontal direction (left to right).
Sets the number of sections (zones) in which waveforms are displayed.
1zone
Displays waveforms from all channels in one zone.
2zone
Displays waveforms in two zones (Ch 1 to 5 in one zone, Ch 6 to 10 in another).
5zone
Displays two waveforms each in five zones.
10zone
Displays each waveform separately in 10 zones.
Sets the compression rate for the waveforms to be displayed in the Compressed waveforms
display (previous).
Description
<Waveform Scrolling Direction:Horizontal>
<When set to 10 zone>
Sets the compression rate to 
display waveforms in this area. 
Settings and Measurement
3-29

Advertisement

Table of Contents
loading

Table of Contents