Table of Contents
Advertisement
Checks and Preparation
(2) Connect the Power cable and protective ground cord to the power terminal.
Use non-insulated solderless ring terminals (for 4 mm screw) and insulation caps.
Recommended screw torque is 12 to 14 kgf/cm.
(3) Close the power terminal (transparent) cover and fix it with screws.
(4) Open the front panel and turn the power switch ON to power on the device.
2-8
Functional
ground terminal
Power cables
Power switch
Protective
ground terminal
Protective
ground cord
Non-insulated
solderless ring terminals
Insulation caps
Advertisement
Table of Contents
