Table of Contents
Advertisement
(1)-5 Misc.
Setting items
(1)
Inter-ＣＨ Op Settings
(2)
Span settings
(3)
Annotation string
(4)
Perform Auto Zero ADJ
(5)
Reset Auto Zero ADJ.
(6)
[Set Zero Point as]
CALC. Settings (1)
①
②
③
④
⑥
⑧
Setting items
Inter-ＣＨ Op Settings Off, ON, D/W (humidity)
(1)
Operation
(2)
(3)
Scaling
(4)
Upper/Lower
(5)
Dec pt
(6)
Select
(7)
Choose
(8)
Unit
①
②
③
④
⑤
⑥
Sets which calculation to perform between channels.
Four arithmetic operations (+, -, ∗, /) can be selected.
Humidity can be calculated using dry bulb/wet bulb (CH2 only).
*For details, see next page.
Sets the upper/lower span values of the displayed waveforms.
Sets annotations (comments) to be displayed for each channel.
Maximum of 11 characters can be entered.
Enter the text string using alphanumerics.
Calculates the current input voltage as the zero position voltage value.
Cancels the zero position voltage value and displays the input voltage.
Displays the zero point voltage value (display only).
⑤
⑦
D/W (humidity) calculates humidity with CH1 dry bulb and CH2 wet bulb input values.
In D/W (humidity), CH1/CH2 are temperature settings. Only CH2 can be selected.
CH-X, Function, CH-Y
CH-X
Select from CH1 to CH10.
Arithmetic operations (+, -, ∗, /)
Function
CH-Y
Select from CH1 to CH10.
/ 1000000, / 1000, x 1, x 1000, x 1000000
Selects the display method of calculated results.
<Ex.>
calculated result = 0.001
x 1
: 0.001
x 1000
: converts to 1.
x 1000000 : converts to 1000.
Sets the upper/lower span values of the displayed waveforms.
The values set here will be applied to calculated results.
Selects the decimal point position of span settings.
Selects the display unit for calculation results.
Langth, Area, Volume, Velocity, Accel., Freq., Mass, Energy, Pressure, Flow, Temp
Selects the converted unit.
The unit displayed here is the unit type selected in the Select settings.
To set a unit that is not displayed here, you can enter text in the [Unit] settings to
set a new unit. The unit set here will be displayed in Unit.
Selects the converted unit, which can be specified as a user-defined
character string consisting of alphanumerics.
Unit parameter can also be specified by selecting a unit in the Select settings.
Description
Description
calculated result = 1000
x 1
: 1000
/ 1000
: converts to 1.
/ 1000000
: converts to 0.001.
Settings and Measurement
3-19
Advertisement
Table of Contents
