Table of Contents
Advertisement
(5) MARK settings
This menu allows you to set marks or icons displayed on the waveforms.
Items
User Mark Settings
Mark Display Settings Start/Stop Mark Display
(5)-1 User Mark Settings
You can register a text string to be displayed on the screen as user-defined icons, according to need.
There are eight types of user-defined marks that can be registered.
To display a user-defined icon, press the ENTER key on the Mark
CHECKPOINT
• The displayed user-defined icons will also be stored in the captured data.
• There is no restriction on how many icons that can be displayed. However, note that information on
these icons are stored in the data file and will thus effect the data file size.
22 single-byte characters can be displayed when using horizontal scroll.
(5)-2 Mark Display Settings
You can display three types of system indicators, along with user-defined icons.
This sections allows you to enable/disable the system indicator display function.
Setting items
Start/Stop Mark Display Indicator that shows when capture started and stopped.
Trigger Mark Display
Alarm Mark Display
Settings 1
Settings 2
Mark1 to 8
Trigger Mark Display
Alarm Mark Display
Sets ON/OFF of this indicator display function.
Indicator that shows when trigger was generated and capture started.
Sets ON/OFF of this indicator display function.
Indicator that shows when the alarm was generated.
Sets ON/OFF of this indicator display function.
Selections available
Enter alphanumerics. Up to 30 characters can be used.
On, Off
On, Off
On, Off
on the menu.
The text string you entered will be displayed here.
Description
Settings and Measurement
3-31
Advertisement
Table of Contents
