GRAPHTEC MT100 User Manual page 60

(1)-6 Pulse EU settings
①
⑥
Setting items
(1) Function
(2) Meas. Value
(3) EU Value
(4) Select
(5) Choose
(6) Unit
CAUTION
• If a message appears, follow the instructions by reducing the number of digits to be output by one, or
leaving the number of digits as is and changing the EU value.
• The Scaling operation is calculated using a ratio of the Meas. Value or EU Output Value settings.
"++++/----" is displayed when the converted value cannot be processed by MT100.
Span may be changed according to the value set for Scaling.
(2) DATA settings
This menu is used to specify capture-related items and calculations.
Items
Record Settings
Backup Settings
Statistical Calculation Calc. settings 1
② ③
④ ⑤
Selects ON/OFF of the scaling function.
Sets the upper value of the numeric value to be converted
Sets the upper output value after conversion.
Selects the type of engineering unit (from the following)
Langth, Area, Volume, Velocity, Accel., Freq., Mass, Energy, Pressure, Flow, Temp
Selects the converted unit.
The unit displayed here is the unit type selected in the Select settings.
To set a unit that is not displayed here, you can enter text in the Unit settings to set a new unit.
The unit set here will be displayed in Unit.
Selects the converted unit, which can be specified as a user-defined character string consisting
of alphanumerics.
Unit parameter can also be specified by selecting a unit in Select.
Settings 1
Sampling Interval
File Name
Backup Intervals
Backup Desination Backup Desination USB1, FTP
Calc. settings 2
Description
Settings 2
100, 125, 200, 250, 500 ms, 1, 2, 5, 10, 20, 30 s,
1, 2, 5, 10, 20, 30 min, 1 h
File Name Capture destination
Folder
File Name
Name Type Auto, User, SN
File Type GBD, CSV
Off, 1, 2, 6, 12, 24 h
Folder Name enter text string
Off, Average, Max, Min, Peak, RMS
Off, Average, Max, Min, Peak, RMS
Settings and Measurement
Selections available
: MEM, USB1
: enter text string
: enter text string
(when Name Type is set to Auto)
3-21