Clock Adjustment - Kenwood AX-7 Instruction Manual

Clock adjustment

As the clock is not only used to show the time of the day but also used in timer operations, be sure to set
the clock adjustment in advance.
Turn POWER ON. ¢
1
Select "TIME ADJUST".
1
Press the MODE key, turn the INPUT SEL./
MULTI CONTROL knob to select "TIME
ADJUST". Then press the SET key.
2
Adjust the day of week.
1
Adjust the day of week
2
Press the SET key.
Decrease Increase
3
Adjust the hour.
1
Adjust the hour
2
Press the SET key.
4
Adjust the minute.
1
Adjust the minute.
2
Press the SET key.
÷ The time display starts to blink.
Example: Adjustment to Monday 8:07
÷ After the day is input, the hour display starts to blink.
Example: Adjustment to Monday 8:07
÷ After the hour is input, the minute display starts to
blink.
Example: Adjustment to Monday 8:07
÷ If you made a mistake, restart from the beginning.
÷ When the time of day has been set by pressing the
SET key, the display shows "COMPLETE".
÷ After a power failure or the AC power cord has been
unplugged, the time set will be cleared. You have to set
the time again when the unit is switched on.
÷ When the 7 (STOP) key is pressed while the power is
in the standby mode, the time of day will be displayed
for 5 seconds.
1 2 3 4 5
L
30 10 5 3 1 0 (-dB)
R
1 2 3 4 5
L
30 10 5 3 1 0 (-dB)
R
1 2 3 4 5
L
30 10 5 3 1 0 (-dB)
R
1 2 3 4 5
L
30 10 5 3 1 0 (-dB)
R
23 EN