Recording Of An Entire Cd (Cd Record) - Kenwood XD Series Instruction Manual

46
Recording of an entire CD
Perform the follow ing operation w hile the CD player is in
stop mode to start recording at the same time as the start
of playback.
When equalizer or another effect is applied to the
sound, the sound w ith the applied effect can be re-
corded.
Recording preparations are required. º
1
Press the DUBBING key.
2
Select "CD RECORD".
3
Select the disc.
4
Start recording.
Downloaded from: http://www.usersmanualguide.com/
1 Select. 2 Press SET.
M ULTI
CON TROL
SET
M ULTI
CON TROL
Press the ENTER Key.
EN TER
(CD RECORD)
p
º º º
º
(Steps 1to 3) (For the reverse mode, select " p" (tw o-w ay recording).)
÷ Recording of CD starts at the same time as playback.
÷ At the end of tape, the music is not recorded on the leader tape portion.
If you do not w ant any music to be interrupted in the middle, refer to
" Recording" and start recording of side B w ith the interrupted track.
To end recording in the middle
÷ Both the cassette deck and CD player stop.
CD RECORD
CD EDIT
CD PGM RECORD
TAPE DUBBING
(Only w hen the selected input is TAPE and tapes
are present in both decks A and B)
C D R E C O R D
D s I C 2
Convenient CD recording
XD-SERIES (En)
º
7