Kenwood XD Series Instruction Manual page 26

26
Let's put out some sound
XD-SERIES (En)
Relay play
When tapes are set in the decks A and B and the reverse mode is
A A
set to "[" (play of both sides), play of the second deck w ill be
started automatically after play of the first deck has been com-
pleted. Tape play w ill be repeated alternately.
÷ Relay play is not possible in the reverse modes " " " and " " " .
A tip for use of the tape counter
The tape counter is set to "0000" w hen a cassette tape is loaded.
T A P E B 0 0 0 0
By w riting dow n the counter reading in case you w ant to inter-
rupt recording (playback) in the middle of the tape, the memo
w ill be helpful as a reference for locating the same position w hen
NR
continuing the recording (playback) the next time. The tape coun-
ter figure decrements during recording or playback of the back
side (w hile the 2 tape transport indicator is lit).
To set the tape counter to "0000", open the cassette holder once.
Then the counter w ill be reset.
Downloaded from: http://www.usersmanualguide.com/