Kenwood XD Series Instruction Manual page 11

FM indoor antenna
The accessory antenna is for temporary indoor use only. For stable
signal reception w e recommend using an outdoor antenna. Remove
the indoor antenna if you connect one outdoors.
3 3
Speaker Unit
1
Tw ist
Downloaded from: http://www.usersmanualguide.com/
Speaker (left)
− +
Before connecti ng the Front
Speakers
Stick the supplied front speaker pads to
the bottom of the front speakers to stabi-
lize the speakers and prevent them from
slipping.
Speaker cushion
2
Caution regarding placement
To maintain proper ventilation, be sure to leave a space around
the unit (from the largest outer dimensions including projec-
tions) equal to, or greater than, show n below.
rear panel: 10 cm
1 Strip the coating from the tip of cord and tw ist the
conductor.
1 1
2 Connect to the antenna terminal.
3 Locate the position providing good reception condition.
4 Fix the antenna.
BASS REFLEX SPEAKER SYSTEM
The external view is variable depending on the model and
marketing destination area.
3 4
System connection (XD-5...series)
XD-SERIES (En)
BASS REFLEX SPEAKER SYSTEM
Notes Notes
1. In case an associated system compo-
nent is connected, also read the instruc-
tion manual of the component.
2. Never short-circuit the + and – speaker
cords.
3. If the left and right speaker connections
or the + and – polarity are inverted, the
sound w ill be unnatural w ith unclear
positioning of musical instruments, etc.
Be sure to connect them w ithout mis-
take.
Notes Notes
1. Be sure to insert all connection cords
securely. If their connections are imper-
fect, the sound may not be produced or
noise may interfere.
2. Before plugging or unplugging a con-
nection cord, be sure to unplug the
pow er cord from the w all AC outlet. If
connection cords are plugged or un-
plugged w ith the pow er cord left plugged
in, malfunction or damage may result.
11