Renesas SH7040 Series Supplementary Information page 9

Thank you for purchasing the SH7040 series E6000 emulator.
The SH7040 series E6000 emulator (hereafter referred to as the E6000) was designed as a
software and hardware development tool for systems based on Renesas's original microcomputers
SH7040 series.
The E6000 provides three 3.5-type floppy disks: three stores the HDI system (HS7040EPI60SF
disks #1 to #3).
There are three manuals for the E6000: the SH series E6000 Emulator User's Manual, this
Supplementary Information, and the HDI User's Manual. The E6000 Emulator User's Manual
describes E6000 functions common to all SH series microcomputers. This Supplementary
Information describes the functions specialized for each microcomputer supported by the SH7040
series E6000 emulator. Please read this manual before using the E6000.
To connect the E6000 to the user system, a user system interface cable for each package type is
available. For details on the user system interface cable, refer to the User System Interface Cable
User's Manual.
The following shows the related manuals:
• SH Series E6000 Emulator User's Manual (HS7000EPI60HE)
• HDI User's Manual (HS6400DIIW4SE)
• User System Interface Cable User's Manual (HS7042ECH61HE, etc.)
• The PC interface board user's manual which will be the following manuals:
ISA Bus Interface Board User's Manual (HS6000EII01HE)
PCI Bus Interface Board User's Manual (HS6000EIC01HE, HS6000EIC02HE)
PCMCIA Interface Card User's Manual (HS6000EIP01HE)
LAN Adapter (HS6000ELN01H)
• SH7010, SH7040, SH7050 SIMM Memory Module User's Manual
(HS6000EMS22HE)
®
Note: Microsoft and Windows
United States and/or in other countries.
Preface
®
are registered trademarks of Microsoft Corporation in the
i