Renesas SH7040 Series Supplementary Information page 20

Mode Pins (MD3, MD2, MD1 and MD0): The mode pins are only monitored. The operation
modes and clock modes depend on the HDI settings.
Figure 2.2 User System Interface Circuit for Mode Pins
RES and NMI: The RES and NMI signals are input to the MCU through the emulator control
circuit. The rising/falling time of these signals must be 8 ns/V or less.
Emulator
control circuit
Figure 2.3 User System Interface Circuit for RES and NMI
8
Vcc
4.7 k
47
User system
interface cable