Table of Contents
Advertisement
Quick Links
4-In-1 Combination Bucket
CB1060
70740
Table of Contents
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
381-169M
Operator's Manual
Printed 7/28/22
Advertisement
Table of Contents
Related Manuals for Land Pride CB1060
Summary of Contents for Land Pride CB1060
- Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 7/28/22...
-
Page 2: Machine Identification
Model Number Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov CB1060 4-In-1 Combination Bucket 381-169M 7/28/22... - Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
- Page 4 Land Pride products. App on your smart phone, open the App, Refer to Parts Manual QR point your phone on the QR code and Locator on this page for take a picture. detailed instructions. CB1060 4-In-1 Combination Bucket 381-169M 7/28/22...
-
Page 5: Safety At All Times
Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol The SAFETY ALERT SYMBOL indicates there is a potential hazard Careful operation is your best to personal safety and extra precaution must be taken. - Page 6 Replace parts on this attachment correct tools and equipment. follow all shutdown procedures with genuine Land Pride parts only. Always properly match the wheel before leaving the operator’s seat to Do not alter this attachment in a way size to the properly sized tire.
-
Page 7: Avoid High Pressure Fluids
Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery Land Pride recommends the use of a CAB or roll-over-protective- A slow moving power machine Never carry riders on tractor or structures (ROPS) and seat belt can create a hazard when driven attachment. -
Page 8: Important Safety Information
Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Avoid crystalline Silica Be aware of and follow OSHA If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (quartz) Dust guidelines for exposure to airborne... - Page 9 Important Safety Information This page left blank intentionally. 7/28/22...
-
Page 10: Safety Labels
Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com. - Page 11 70741 70243 838-293C Warning: Read Operator’s Manual - General Warning 1 Place: On the backside of the bucket. 70741 70245 838-094C Warning: High Pressure Fluid Hazard 1 Place: On the backside of the bucket. 7/28/22 CB1060 4-In-1 Combination Bucket 381-169M...
-
Page 12: Using This Manual
Table of Contents Introduction Introduction Owner Assistance Land Pride welcomes you to the growing family of new product owners. This 4-in-1 Combination Bucket has The dealer should complete the Online Warranty been designed with care and built by skilled workers Registration at the time of purchase. -
Page 13: Tractor Requirements
CB1060 ..... . . 40 hp (30 kW) Have a hoist, forklift, or loader with properly sized chains and CB1072 . - Page 14 5. Install one of the “Optional Third Function Valve NOTE: This bucket is designed with a universal Kits” listed on page 12. Refer to Installation Manual quick attach hitch plate on the front mounted loader. included with the kit. CB1060 4-In-1 Combination Bucket 381-169M 7/28/22...
- Page 15 4. Rotate top of loader hitch plate slightly forward. 5. Position top of loader hitch plate under the bucket’s NOTE: If Land Pride “Optional Kits” are not top angle bars. Slowly raise loader arms until the included, customer must supply required hydraulic loader hitch is seated under the top angle bars.
-
Page 16: Purge Hydraulic System
Loosen elbow fittings (#3A) and slowly retract hydraulic cylinders to purge system of air. i. Shut tractor down before dismounting. Refer to “Tractor Shutdown Procedure” on page 9. j. Tighten fittings (#3A) after all trapped air has been removed. CB1060 4-In-1 Combination Bucket 381-169M 7/28/22... -
Page 17: Check Equipment Clearances
9. Raise bucket approximately 36" (1 m) off the ground to the bucket. and fully extend hydraulic cylinders (#4) to pivot jaw fully closed. Repeat steps 7-8. 7/28/22 CB1060 4-In-1 Combination Bucket 381-169M... - Page 18 Optional Third Function Valve Kits Refer to Figures 2-1, 2-2, 2-3, & 2-4: Land Pride offers four optional “Third Function Valve Kits”. These kits are designed to attach to Kubota B and 40 hp and below Kubota L Series tractors with front mounted loaders.
- Page 19 Figure 2-3 Refer to Figure 2-5: This hose kit is designed to complete the hydraulic connection between Model CB1060 bucket and “Third Function Valve Kit #380-093A” or “Third Function Valve Kit #380-149A” on page 14. Elbows (#3) attach to bucket fittings (#1 & #2) on page 10.
- Page 20 Make any necessary break, hydraulic lines can burst, and/or hydraulic controls changes to controls and hydraulic hook-ups before can be actuated even when power to hydraulics is off. putting equipment into service. CB1060 4-In-1 Combination Bucket 381-169M 7/28/22...
- Page 21 Manual when parking or dismounting the power machine. • Wear appropriate personal protective gear. Include eye protection when appropriate and when operating a power machine without an enclosure or protective shield. Dust and debris can get into the eyes. 7/28/22 CB1060 4-In-1 Combination Bucket 381-169M...
-
Page 22: Transport Safety
Enter pick-up zone carefully making sure no object will e. When digging hard ground, slowly raise and lower come through or pass the attachment into the operator’s the cutting edge while slowly traveling forward. space. CB1060 4-In-1 Combination Bucket 381-169M 7/28/22... - Page 23 If material needs to be removed, close the jaw to 8. When traveling over a ramp or incline, keep load on capture accumulated material and remove it. the “uphill” side of tractor. 7/28/22 CB1060 4-In-1 Combination Bucket 381-169M...
- Page 24 It isn’t going to take you long to learn how to your Land Pride 4-in-1 Combination Bucket. use your new Land Pride 4-in-1 Combination Bucket, but we do recommend that you take a little time to practice See “Specifications &...
-
Page 25: General Maintenance
3. Repaint parts where paint is worn or scratched to Replace all worn, damaged, or missing bucket parts with prevent rust. Ask your Land Pride dealer for aerosol genuine Land Pride parts. Replace safety labels by touch-up paint. Paint is also available in touch-up obtaining new labels from your Land Pride dealer. -
Page 26: Lubrication Points
39605 Jaw Pivot Pins 2 - Zerks (One on each end of bucket.) Type of Lubrication: Multi-purpose Grease Quantity = As required (make sure grease is visible) CB1060 4-In-1 Combination Bucket 381-169M 7/28/22... -
Page 27: Section 5: Specifications & Capacities
) struck and 10.35 ft (0.29 m ) (heaped) Hydraulic cylinder pins 1" dia. rod pivot pins Jaw pivot pins 1" dia. pivot pins Hydraulic cylinders Two 2" x 6" x 1 1/8" Rod 70746 7/28/22 CB1060 4-In-1 Combination Bucket 381-169M... -
Page 28: Section 6: Features & Benefits
Complete the hydraulic connections between bucket and quick connect couplers supplied Hydraulic Hose Kits with the “Optional Third Function Valve Kits”. Hook-up is easy at the front of the loader. CB1060 4-In-1 Combination Bucket 381-169M 7/28/22... -
Page 29: Section 7: Troubleshooting
Re-clamp load once load is free from pile. Load is not centered in bucket. Center load on bucket. Traveling forward while going down an incline with a slope in excess of Back down steep inclines. 10 percent (5.7 degrees). 7/28/22 CB1060 4-In-1 Combination Bucket 381-169M... -
Page 30: Section 8: Torque Values Chart
Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. All locknuts or lubricated fasteners: Use 75% of torque value. (i.e. 1/2"-13 GR5 = 76 ft-lb; 75% of 76 or .75 x 76 = 57 ft-lb) CB1060 4-In-1 Combination Bucket 381-169M 7/28/22... -
Page 31: Warranty
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship. - Page 32 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...