Page 1
Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 11/3/20...
Model Number Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov SGC0548 Claw Grapple 380-138M 11/3/20...
Page 3
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
Page 4
Land Pride products. Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture. detailed instructions. SGC0548 Claw Grapple 380-138M 11/3/20...
Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
Replace parts on this attachment correct tools and equipment. follow all shutdown procedures with genuine Land Pride parts only. Always properly match the wheel before leaving the operator’s seat to Do not alter this attachment in a way size to the properly sized tire.
Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery Land Pride recommends the use of a CAB or roll-over-protective- Slow moving tractors, and Never carry riders on tractor or structures (ROPS) and seat belt self-propelled equipment can implement.
Page 8
Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Avoid crystalline Silica Be aware of and follow OSHA If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (quartz) Dust guidelines for exposure to airborne...
Page 9
Important Safety Information This page left blank intentionally. 11/3/20...
Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
Page 11
Table of Contents Important Safety Information 35825 838-378C Warning: Pinch Point or Crushing Hazard 2 Places: Located on both sides of the front. 35825 858-765C Warning: Pinch Point Hazard 2 Places: Located on both ends 11/3/20 SGC0548 Claw Grapple 380-138M...
Page 12
Table of Contents Important Safety Information This page left blank intentionally. SGC0548 Claw Grapple 380-138M 11/3/20...
Introduction Introduction The parts on your Claw Grapple have been specially Land Pride welcomes you to the growing family of new designed by Land Pride and should only be replaced with product owners. This Claw Grapple has been designed genuine Land Pride parts. Contact a Land Pride dealer if with care and built by skilled workers using quality customer service or repair parts are required.
Hydraulic Outlets (Two Options): Parts Manual and pins are installed in the correct location. Land Pride’s Third Function Valve Kit . duplex outlet 380-138P Refer to the Parts Manual if unsure. Kubota’s Third Function Valve Kit ..duplex outlet Make sure working parts move freely, bolts are Operator’s...
Page 15
5. Reverse instructions above to lock the park stands in their stored position. 35829 Park Stands Rotated Down Figure 1-1 11/3/20 SGC0548 Claw Grapple 380-138M...
Page 16
Shutdown Procedure” on page 21. 10. Connect grapple hose couplers to bulk head mount couplers. See “Hydraulic Hose Hook-up” on page 18 for detailed hook-up instructions. 11. Skip to “Check Equipment Clearances” on page 18. SGC0548 Claw Grapple 380-138M 11/3/20...
Page 17
(#3). 10. Carefully back away from the grapple. 11. Reposition loader arms to a suitable height for traveling or shut tractor down according to “Tractor Shutdown Procedure” on page 21. 11/3/20 SGC0548 Claw Grapple 380-138M...
Page 18
The “BX Direct Pin Option” is required for this method 3. Check for and remove any debris in the hitch point areas before hooking-up to the grapple. of hook-up. See your nearest Land Pride dealer to order this optional kit. 4. Approach grapple driving tractor slowly forward until...
Page 19
12. Secure lower hitch pins with hairpin cotters (#5). 13. Carefully back away from the grapple and reposition loader arms to a suitable height for traveling or shut tractor down according to “Tractor Shutdown Procedure” on page 21. 11/3/20 SGC0548 Claw Grapple 380-138M...
Page 20
BX80 Series Kubota tractors. 3. Check for and remove any debris in the hitch point See your nearest Land Pride dealer to order this kit. areas before hooking-up the grapple. 380-296A Option, BX80 Loader Arm Pin-on Kit.
Page 21
14. Refer to Figure 1-7: Keep flat washers (C) and snap 14. Shut tractor down according to “Tractor Shutdown rings (A) with the loader. They will be reuse when Procedure” on page 21. hooking up to the next attachment. 11/3/20 SGC0548 Claw Grapple 380-138M...
Upper Tee (C) Kubota’s BX Series 3RD Function Valve Option Figure 1-9 a. If coupled to Land Pride’s third function valve, switch hoses (#20 & #21) at the tees (C & D). Lower Tee (D) b. If coupled to Kubota’s third function valve, switch hydraulic hoses (#20 &...
6. Operate hydraulic controls to verify control movements function properly and equipment movements are correct. Make any necessary changes to controls and hydraulic hook-ups before putting equipment into service. 11/3/20 SGC0548 Claw Grapple 380-138M...
Page 24
Dust and • Do not use this equipment to lift, carry, push or tow other debris can get into the eyes. equipment and objects. It is not properly designed or guarded for this use. SGC0548 Claw Grapple 380-138M 11/3/20...
Use accessory lights, clean reflectors, and a slow moving vehicle sign that is visible from the back to warn operators in other vehicles of your presence. Always comply with all federal, state, and local laws. 11/3/20 SGC0548 Claw Grapple 380-138M...
Before traveling with a loose load, lower the load to ground, release the load, and re-clamp the load to make it secure. 12. Position the load at a safe, low traveling height before transferring it to the unloading site. SGC0548 Claw Grapple 380-138M 11/3/20...
Page 27
It isn’t going to take you 3. Slowly raise load to required height. long to learn how to use your new Land Pride Claw Grapple, but we do recommend that you take a little time 4.
Page 28
If the loader is not supplied with Kubota’s 3rd Function Valve shown in Figure 3-6 on page 25, an optional Land Pride kit can be purchased to use with the SGC0548 Claw Grapple. The Land Pride kits are designed to attach to Kubota’s 60, 70, and 80 Series BX tractors with front...
Page 29
Refer to Figure 3-5 & Figure 3-6: Two female pioneer couplers Kubota 3rd Function Valve Couplers . . 380-281A As an option, Land Pride offers two adapters (#1) and two Optional 3rd Function Hoses quick connect male pioneer couplers (#2) for attaching to Figure 3-4 Kubota’s third function valve ports (A).
3. Repaint parts where paint is worn or scratched to • prevent rust. Ask your Land Pride dealer for aerosol Check hydraulic hoses and fittings frequently. Brush and touch-up paint. They are also available in touch-up other debris can damage hoses and fittings causing the load bottles with brush, quarts, and gallon sizes by adding to release and fall.
Allows the grapple to be hitched directly to the loader arms without Extended Hitch Pins (Option) purchasing Kubota’s Original Quick Hitch to make the connection. SGC0548 Claw Grapple 380-138M 11/3/20...
Prying objects out of the ground. Never use grapple to pry objects. Wedging objects between teeth with upper Do not wedge objects between teeth with claw. upper claw. 11/3/20 SGC0548 Claw Grapple 380-138M...
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.