Table of Contents
Advertisement
Quick Links
Grapples
SGC0548
35825
Table of Contents
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
380-138M
Operator's Manual
Printed 2/5/19
Advertisement
Table of Contents
Related Manuals for Land Pride SGC0548
Summary of Contents for Land Pride SGC0548
- Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 2/5/19...
- Page 2 Option(s) weight and measurements. Model Number Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov SGC0548 Grapples 380-138M 2/5/19...
-
Page 3: Table Of Contents
Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future. - Page 4 Parts Manual for this equipment. for Land Pride products. Download the appropriate App on your Refer to Parts Manual QR smart phone, open the App, point your Locator on this page for phone on the QR code and take a picture.
- Page 5 Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a assurance against an accident.
- Page 6 Lower attachment to the ground and Replace parts on this attachment implement. follow all shutdown procedures with genuine Land Pride parts only. Attach the chain to the tractor before leaving the operator’s seat to Do not alter this attachment in a way drawbar support or other specified perform maintenance.
- Page 7 Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery Land Pride recommends the use of a CAB or roll-over-protective- Slow moving tractors, and Never carry riders on tractor or structures (ROPS) and seat belt self-propelled equipment can implement.
- Page 8 Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
-
Page 9: Terminology
Introduction Introduction The parts on your Claw Grapple have been specially Land Pride welcomes you to the growing family of new designed by Land Pride and should only be replaced with product owners. This Claw Grapple has been designed genuine Land Pride parts. Contact a Land Pride dealer if with care and built by skilled workers using quality customer service or repair parts are required. -
Page 10: Section 1: Assembly & Set-Up
Section 1: Assembly & Set-Up Section 1: Assembly & Set-Up Tractor Requirements The SGC0548 Grapple is designed exclusively for attaching to Kubota BX tractors with a front loader. Kubota Tractor: 60 & 70 Series BX Tractors With a Front Loader Hitch Requirement: Kubota’s Original Quick Hitch Option No. -
Page 11: Bx Third Function Valve Kit Accessory
380-137A VALVE KIT, BX THIRD FUNCTION Refer to Figure 1-2: Right-Hand Land Pride offers, as an accessory, the “BX Third Side Function Valve Kit”. This kit includes a joystick with two push-buttons (#14) for opening and closing the grapple jaw, valve assembly (#2), bulk head assembly with quick... -
Page 12: Control Lever Assembly
Figure 1-6 with Hose Route Along Loader Arm 3/8"-16 x 3 1/32" x 2 3/4" u-bolt (#10) and hex whiz Figure 1-7 nuts (#9). Tighten whiz nuts to the correct torque. SGC0548 Grapples 380-138M 2/5/19... -
Page 13: Hook-Up With Kubota Quick Hitch
10. Rotate loader quick hitch vertical and position loader 6. Raise grapple slightly off the ground and rotate arms to a suitable traveling height. parking stands (#1) up until locked in place. See “Parking Stand” on page 6 for detailed instructions. 2/5/19 SGC0548 Grapples 380-138M... -
Page 14: Hook-Up Without Kubota Quick Hitch
Hook-up Without Kubota’s Original Quick Hitch Figure 1-9 Hook-up Without Kubota Quick Hitch Refer to Figure 1-10: Land Pride’s “BX Direct Pin Option” is required when DANGER hooking the grapple directly to the front loader without To avoid serious injury or death: “Kubota’s Original Quick Hitch Option”. -
Page 15: Hydraulic Hose Hook-Up
Refer to your tractor’s stands locked in the rotated down position. The attachment Operator’s Manual for recommended hydraulic fluid can tip over if stored improperly. and procedure for checking hydraulic fluid level. 2/5/19 SGC0548 Grapples 380-138M... -
Page 16: Section 2: Operating Procedures
Operate grapple through its full range of movements to check for clearances. Refer to “Check Equipment Clearances” on page 11 for detailed instructions. SGC0548 Grapples 380-138M 2/5/19... -
Page 17: Transport Safety
If implement blocks visibility of slow moving lower jaw and parking stands are resting on solid level vehicle sign, relocate sign so it is visible from the back at all ground. times. Always comply with all federal, state, and local laws. 2/5/19 SGC0548 Grapples 380-138M... -
Page 18: Claw Grapple Operation
12. Position load at a safe, low traveling height before 9. Lower grapple to transporting height (low to the transferring to unloading site. ground) before moving again. SGC0548 Grapples 380-138M 2/5/19... -
Page 19: Ripping Out Bushes
It isn’t going to take you 3. Rotate front of grapple down while lowering unit until long to learn how to use your new Land Pride Claw upper teeth extend into the ground on the far side of Grapple, but we do recommend that you take a little time the bush and lower teeth are on the near side. - Page 20 3. Repaint parts where paint is worn or scratched to and fall. prevent rust. Ask your Land Pride dealer for aerosol • Check hydraulic hoses and fittings frequently. Brush and touch-up paint.
- Page 21 Teeth Spacing 9 3/8" Tooth Thickness 1/4" Working Length of Teeth 8 3/8" Hydraulic Cylinder 2" x 4" x 1 1/8" Rod Maximum Pressure Rating 2500 psi 26-1/4 " 17-1/8 " 48-7/8 " 19-3/4 " 35830 2/5/19 SGC0548 Grapples 380-138M...
- Page 22 Allows the grapple to be hitched directly to the loader arms without Extended Hitch Pins (Option) purchasing Kubota’s Original Quick Hitch to make the connection. SGC0548 Grapples 380-138M 2/5/19...
- Page 23 Prying objects out of the ground. Never use grapple to pry objects. Wedging objects between teeth with upper Do not wedge objects between teeth with claw. upper claw. 2/5/19 SGC0548 Grapples 380-138M...
- Page 24 = nominal thread diameter in millimeters x thread pitch 1-1/2" - 12 1330 2970 2190 4820 3560 Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. SGC0548 Grapples 380-138M 2/5/19...
- Page 25 This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.
- Page 26 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...