Land Pride SA10 Operator's Manual
Land Pride SA10 Operator's Manual

Land Pride SA10 Operator's Manual

Hydraulic post hole digger

Advertisement

Quick Links

Table of Contents
Hydraulic Post Hole Digger
SA10
78213
Standard Post Hole Digger
Standard Post Hole Digger
With Hitch Plate, Hydraulic Hoses, and 9" Auger Options
317-433M
Operator's Manual
!
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
Printed 6/2/22

Advertisement

Table of Contents
loading

Summary of Contents for Land Pride SA10

  • Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 6/2/22...
  • Page 2: Machine Identification

    Serial Number Machine Height Machine Length Machine Width Machine Weight Delivery Date First Operation Options/Accessories Dealer Contact Information Name: Street: City/State: Telephone: Email: California Proposition 65 WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov SA10 Hydraulic Post Hole Digger 317-433M 6/2/22...
  • Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
  • Page 4 Land Pride products. App on your smart phone, open the App, Refer to Parts Manual QR point your phone on the QR code and Locator on this page for take a picture. detailed instructions. SA10 Hydraulic Post Hole Digger 317-433M 6/2/22...
  • Page 5: Safety At All Times

     Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol The SAFETY ALERT SYMBOL indicates there is a potential hazard Careful operation is your best to personal safety and extra precaution must be taken.
  • Page 6  Replace parts on this attachment correct tools and equipment. follow all shutdown procedures with genuine Land Pride parts only.  Always properly match the wheel before leaving the operator’s seat to Do not alter this attachment in a way size to the properly sized tire.
  • Page 7: Avoid High Pressure Fluids

    Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery  Land Pride recommends the use of a CAB or roll-over-protective-  A slow moving power machine  Never carry riders on tractor or structures (ROPS) and seat belt can create a hazard when driven attachment.
  • Page 8: Important Safety Information

    Important Safety Information These are common practices that may or may not be applicable to the products described in this manual. Avoid crystalline Silica  Be aware of and follow OSHA  If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (quartz) Dust guidelines for exposure to airborne...
  • Page 9 Important Safety Information This page left blank intentionally. 6/2/22...
  • Page 10: Safety Labels

    Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com.
  • Page 11 Warning: High Pressure Fluid Hazard 1 Place 78217 72928 844-194C Danger: Underground Utilities Hazard 1 Place 78222 78227 844-398C Danger: Guard Missing; 3-point mounted units only 1 Place: on the hub of the optional auger 6/2/22 SA10 Hydraulic Post Hole Digger 317-433M...
  • Page 12 Warning: Pinch Point Hazard 2 Places: One on each end of the optional hitch plate 70575 78223 818-798C Warning: Pinch Point Hazard 2 Places: On the front side of the optional hitch plate. SA10 Hydraulic Post Hole Digger 317-433M 6/2/22...
  • Page 13: Using This Manual

    Land Pride PFL12 Pallet Fork, then the unit can be mounted on the PFL12 frame eliminating the need to purchase the optional hitch plate. The SA10 is well suited for digging in a variety of soils. Motor Performance in compacted soil conditions can be...
  • Page 14: Tractor Requirements

    Also, read and non-concrete support blocks. understand this Operator’s Manual for your Model SA10 Post Hole Digger. An understanding of how it works will 4. Put tractor in park or set park brake, turn off engine, aid in its assembly and set-up.
  • Page 15 8. Tighten 1/2"-13 nuts (#6) to the correct torque for a GR5 bolt. 8. Tighten 3/8-16 nuts (#1) to the correct torque for a GR5 bolt. 9. Tighten 1/2"-13 nuts (#6) to the correct torque for a GR5 bolt. 6/2/22 SA10 Hydraulic Post Hole Digger 317-433M...
  • Page 16: Installation

    (#2) to the removed auger (#1). 5. Store auger (#1) in a safe location where others will not fall over the auger and in such a way that the auger will not fall on others. SA10 Hydraulic Post Hole Digger 317-433M 6/2/22...
  • Page 17: Hydraulic Hose Assembly

    9/16MJIC end of elbows (A & B). Attach hydraulic hoses (#1A & #2B) to elbows (A & B). 2. Attach male coupler (#2A) to hydraulic hose (1A). 3. Attach female coupler (#2B) to hydraulic hose (#1B). 6/2/22 SA10 Hydraulic Post Hole Digger 317-433M...
  • Page 18: Operator's Responsibilities

    Always shut power machine down following the “Shutdown overhead electrical power lines. Place an orange warning Procedure” provided in this manual before leaving the sign under overhead lines indicating type of danger above. operator’s station. SA10 Hydraulic Post Hole Digger 317-433M 6/2/22...
  • Page 19 (silicosis). Because crystalline silica is a basic component of sand and granite, many activities at construction sites produce dust containing crystalline silica. Trenching, sawing, and boring of material containing crystalline silica can produce dust containing crystalline silica. 6/2/22 SA10 Hydraulic Post Hole Digger 317-433M...
  • Page 20 NOTE: Optional hydraulic hoses (#10) may be purchased with pioneer couplers or flat face couplers. Refer to page 24 to verify your hose setup. Hook-up & Unhook SA10 Post Hole Digger (Kubota BX Loader Shown) Figure 2-1 Hook-up Post Hole Digger d.
  • Page 21: Check Equipment Clearances

    6. Set tractor speed at an idle, engage auger hydraulics Make sure couplers (#8 & #9) are out of the dirt. to view auger rotation. The auger should rotate clockwise for digging when looking down from above. 6/2/22 SA10 Hydraulic Post Hole Digger 317-433M...
  • Page 22 4" (10 cm) high block (#4). 6. Disconnect hydraulic hoses (#9) from the loader. Remove hairpin cotter (#2), Clevis pin (#1), and flat washer (#6). 8. Store removed components in a safe location for reassembly later. SA10 Hydraulic Post Hole Digger 317-433M 6/2/22...
  • Page 23 8. When traveling on roadways, transport in such a way that faster moving vehicles may pass you safely. Restart tractor and rotate hitch plate (#9) horizontal as before and adjust tractor to realign clevis (#7) with pivot link (#5). 6/2/22 SA10 Hydraulic Post Hole Digger 317-433M...
  • Page 24 Stop rotation and raise auger out of the hole. 17. Roll tilt arms into a low carry position when transporting from one digging site to the next. Be careful watching out for people, obstructions, and uneven terrain. SA10 Hydraulic Post Hole Digger 317-433M 6/2/22...
  • Page 25 Refer to “Torque Values Chart for Common Bolt Sizes” on page 32. 25598 Pengo Auger Teeth Mounted at 40 & 50 Degrees Figure 2-5 Hitch Plate Tilted Horizontal Figure 2-4 6/2/22 SA10 Hydraulic Post Hole Digger 317-433M...
  • Page 26: General Operation

    See “Features and Benefits” section or “Product safety of others. Specifications” for additional information on Now that you are properly briefed, your SA10 Post Hole performance enhancing options. Digger is properly installed, and you have the proper digging authorization from the utility companies it’s time to transport to the work site.
  • Page 27 Refer to “Attach Cradle to PFL12 Hitch Frame” 26576 on page 11. If you do not own a PFL12 Pallet Fork, then you will need to purchase the hitch plate below to mount the SA10 Post 14" Extension 7" Extension Hole Digger.
  • Page 28 Refer to Figure 3-6: Refer to Figure 3-7: This hose kit is designed to connect the SA10 Post Hole This hose kit is designed to connect the SA10 Post Hole Digger to a Third Function Valve Kit with pioneer couplers Digger to a Third Function Valve Kit with flat faced located on the front of the tractor loader.
  • Page 29: General Maintenance

    Never go under equipment Replace damaged components as needed. Order only supported by concrete blocks or hydraulics. Concrete can genuine Land Pride parts from your local Land Pride break, hydraulic lines can burst, and/or hydraulic controls dealer.
  • Page 30 16. Separate output housing (#1) from motor (#10). detailed instructions. 17. Store removed hardware in a safe location for 12. Reconnect hydraulic hoses (#6A & #6B) to the loader reassembly. couplers. 18. Dispose of oil in an environmentally safe manner. SA10 Hydraulic Post Hole Digger 317-433M 6/2/22...
  • Page 31: Long Term Storage

    Points” on page 28. 4. Repaint parts where paint is worn or scratched to prevent rust. Ask your dealer for Land Pride aerosol touch-up paint. They are also available in touch-up bottles with brush, quarts, and gallon sizes by adding TU, QT, or GL to the end of the aerosol part number.
  • Page 32: Lubrication Points

    The motor must be removed and disassembled to lubricate the shaft. Refer to “Hydraulic Motor Maintenance” on page 26 for detailed instructions. Type of Lubrication: Multi-purpose grease Quantity = Light film SA10 Hydraulic Post Hole Digger 317-433M 6/2/22...
  • Page 33: Section 5: Specifications & Capacities

    Optional Hitch Plate 49" (125 cm) 67" (170 cm) 30" (76 cm) 48" (122 cm) 6", 9", or 12" (15, 23, or 31 cm) SA10 Post Hole Digger with Optional Hitch Plate and Auger Bundles 6/2/22 SA10 Hydraulic Post Hole Digger 317-433M...
  • Page 34: Section 6: Features & Benefits

    Table of Contents Section 6: Features & Benefits Section 6: Features & Benefits SA10 Post Hole Digger Features & Benefits Features Benefits Drive motor is rated at Fits most sub-compact tractor hydraulic flow requirements. 4-8 gpm (15-30 Lpm) Double swivel motor mount Ensures the auger flighting to be vertical even when the tractor is not on level ground.
  • Page 35: Section 7: Troubleshooting

    Replace with proper couplers. Auger speed is slow Replace with proper size fittings and/or Fittings and/or connections are too small. connections. Dirty oil filter. Replace oil filter. Worn or damaged hydraulic pump. See dealer for repair. 6/2/22 SA10 Hydraulic Post Hole Digger 317-433M...
  • Page 36: Section 8: Torque Values Chart

    Torque tolerance + 0%, -15% of torquing values. Unless otherwise specified use torque values listed above. All locknuts or lubricated fasteners: Use 75% of torque value. (i.e. 1/2"-13 GR5 = 76 ft-lb; 75% of 76 or .75 x 76 = 57 ft-lb) SA10 Hydraulic Post Hole Digger 317-433M 6/2/22...
  • Page 37: Warranty

    This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship.
  • Page 38 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...

Table of Contents