Table of Contents
Advertisement
Quick Links
Grading Scrapers
GS2572, GS2584 & GS2596
26654
Table of Contents
Pictured with optional Scarifier Shanks
!
Operator's Manual
Read the Operator's Manual entirely. When you see this symbol,
the subsequent instructions and warnings are serious - follow
without exception. Your life and the lives of others depend on it!
Cover photo may show optional equipment not supplied
with standard unit.
For an Operator's Manual and Decal Kit in French
Language, please see your Land Pride dealer.
303-268M
Printed 3/14/23
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Land Pride GS25 Series
Summary of Contents for Land Pride GS25 Series
- Page 1 Your life and the lives of others depend on it! Cover photo may show optional equipment not supplied with standard unit. For an Operator’s Manual and Decal Kit in French Language, please see your Land Pride dealer. Printed 3/14/23...
-
Page 2: Machine Identification
Machine Identification Record your machine details in the log below. If you replace this manual, be sure to transfer this information to the new manual. If you, or the dealer, have added Options not originally ordered with the machine, or removed Options that were originally ordered, the weights and measurements are no longer accurate for your machine. - Page 3 Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.
- Page 4 Parts Manual for this link you to available dealers equipment. Download the appropriate for Land Pride products. app on your smart phone. Scan the QR Refer to Parts Manual QR code and take a picture.
-
Page 5: Safety At All Times
Important Safety Information Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Safety at All Times Look for the Safety Alert Symbol Careful operation is your best The SAFETY ALERT SYMBOL indicates there is a potential hazard assurance against an accident. - Page 6 Replace parts on this implement using the correct tools and follow all shutdown procedures equipment. with genuine Land Pride parts only. before leaving the operator’s seat to Do not alter this implement in a way Always properly match the wheel perform maintenance.
-
Page 7: Avoid High Pressure Fluids
Use Seat Belt and ROPS Keep Riders Off Lights and Devices Machinery Land Pride recommends the use of a CAB or roll-over-protective- A Slow moving power machine Never carry riders on the tractor or structures (ROPS) and seat belt can create a hazard when driven implement. - Page 8 Important Safety Information Listed below are common practices that may or may not be applicable to the products described in this manual. Avoid Crystalline Silica Be aware of and follow OSHA If possible, change into disposable (or other local, State, or Federal) or washable work clothes at the (Quartz) Dust guidelines for exposure to airborne...
- Page 9 Important Safety Information This page left blank intentionally. 3/14/23...
-
Page 10: Safety Labels
Spray soapy water onto the cleaned area. all damaged or missing labels. Order new labels from your Peel backing from label and press label firmly onto the nearest Land Pride dealer. To find your nearest dealer, surface. visit our dealer locator at www.landpride.com. -
Page 11: Using This Manual
Introduction Introduction Terminology Land Pride welcomes you to the growing family of new product owners. This Grading Scraper has been “Right” or “Left” as used in this manual is determined by designed with care and built by skilled workers using the direction the operator faces while sitting in the quality materials. -
Page 12: Tractor Requirements
Table of Contents Section 1: Assembly & Set-up Section 1: Assembly & Set-up Tractor Requirements Pre-Assembly Checklist Tractor horsepower should be within the range noted Check Reference below. Tractors outside the horsepower range must not Have a forklift or loader with properly sized chains and be used. - Page 13 Table of Contents Section 1: Assembly & Set-up 26655 Position hitch straps with large holes “A” towards the front. Hitch and Shank Set-up Figure 1-1 Shank Assembly (Optional) Before installing shanks (#15), attach Grading Scraper to the tractor’s 3-point hitch or raise front of scraper up and Refer to Figure 1-1: support it with blocks.
-
Page 14: Point Hook-Up
NOTE: It may be necessary to start your tractor and slowly raise the 3-point hitch about 1" to 2" to align NOTE: Land Pride’s Quick Hitch can be attached to the center link with the center hitch pin hole. the tractor to provide quick and easy 3-point hook- up and detachment. -
Page 15: Blade Height Adjustment
Table of Contents Section 2: Adjustments Section 2: Adjustments Level Scraper 26658 WARNING To avoid serious injury or death: Always keep your body extremities out from under the implement. Hydraulics can drop the implement if a line burst or if lift controls are accidentally actuated. The Grading Scraper should be leveled from left to right and front to back. - Page 16 Table of Contents Section 2: Adjustments Shank Height Adjustment NOTE: (GS2572 & GS2596 Only) Refer to “Top Hole” illustration below: Two of the bent pins (#2) WARNING supplied with model GS2596 only are 1" (2.5 cm) To avoid serious injury or death: longer than the others.
-
Page 17: Operating Checklist
Table of Contents Section 3: Operating Instructions Section 3: Operating Instructions Operating Checklist Safety Information Hazard control and accident prevention are dependent DANGER upon the awareness, concern, prudence, and proper training involved in the operation, transport, storage, and To avoid serious injury or death: •... - Page 18 By now you should have read the operator’s manual and in good condition before operating the attached implement. properly attached your GS25 Series Grading Scraper to Read and obey all instructions on the labels. your tractor’s 3-point hitch. Whether you have chosen our •...
-
Page 19: Section 4: Options
Rear Mounted Cutting Blades Refer to Figure 4-1: Refer to Figure 4-2: Land pride offers an option for adding scarifier shanks to An additional set of cutter blades (#1) with mounting your Grading Scraper for breaking up soil ahead of the hardware (#2 &... -
Page 20: Cutting Blades
Check all bolts after using the unit for several hours to be sure they are tight. Replace any worn, damaged, or illegible safety labels by obtaining new labels from your Land Pride dealer. DANGER To avoid serious injury or death:... -
Page 21: Skid Shoes
4. Store scraper on a level surface in a clean, dry place. Order only genuine Land Pride parts from your local Land Inside storage will reduce maintenance and make for Pride dealer when replacing skid shoe components. -
Page 22: Section 6: Specifications & Capacities
Category l & ll 3-point hitch Hitch Type Category l & ll Quick Hitch Compatible Color Selections Land Pride Beige or Orange 34 9/16" (87.8 cm) 56 1/2" (1.44 m) GS2572 = 78 1/4" (1.99 m) GS2584 = 90 1/4" (2.29 m) GS2596 = 102 1/4"... -
Page 23: Section 7: Features & Benefits
Reversible skid shoes Extends the life of the skid shoes. Heavy duty frame construction. Assures long lasting reliability and performance. Available in Land Pride Beige or Orange Paint. To meet customers preference. 3/14/23 GS2572, GS2584 & GS2596 Grading Scrapers 303-268M... -
Page 24: Section 8: Torque Values Chart
Table of Contents Section 8: Torque Values Chart Section 8: Torque Values Chart Torque Values Chart for Common Bolt Sizes Bolt Head Identification Bolt Head Identification 10.9 Bolt Size Bolt Size (inches) Grade 2 Grade 5 Grade 8 (Metric) Class 5.8 Class 8.8 Class 10.9 in-tpi... -
Page 25: Warranty
This Warranty is limited to the repair or replacement of any defective part by Land Pride and the installation by the dealer of any such replacement part, and does not cover common wear items. Land Pride reserves the right to inspect any equipment or parts which are claimed to have been defective in material or workmanship. - Page 26 Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com...
Need help?
Do you have a question about the GS25 Series and is the answer not in the manual?
Questions and answers