1.2
General instructions on using these operating and maintenance instructions
These operating and maintenance instructions are only complete in combination with the operating and
maintenance instructions of the Comfort PLUS control unit (part no. 010-700).
Symbols and legends used
<1>
[2]
•
3.
–
Italics
To avoid the descriptions of control unit operation becoming unnecessarily difficult to read, no menu prompting
details are described if these can be considered standard and self-explanatory.
If, for example, a section such as
Press down cursor key => Select entry
Instead, it simply reads
2019/08
Reference in the text to a legend number in an illustration
Reference to an illustration
Working step
Working step in numbered sequence
List
Italic case design: Reference to a section / item in the control menu
CAUTION: Warns of a risk to persons and material. Ignoring the instructions marked with this
symbol can lead to serious injuries and material damage.
Note: Technical notes which must be given particular attention.
Maintenance
"SelectMaintenance
Introduction
is to be chosen, the manual does not read
Maintenance
=> Press OK key
"
45 / 240