Testing of Transmitter
Step 4: FSK Modulation Output Test
On the chip layout screen press the PLL/Modulation Options button.
The PLL/Modulation Options View Is Set Up as Shown in Figure 3–10:
Figure 3–10. PLL/Modulation Options View
-
-
-
Select to Program
the TRF6900
Set the DVx bits, as shown in Figure 3–11, by double clicking inside each
DVx box to set the value to either a 1 or 0. For this example only DV6 is
set to a 1.
Press the Send Bits button located on the PLL/Modulations Options
screen, to obtain the results shown in Figure 3–11.
Press the Close button located on the PLL/Modulations Options screen.
Select This Button
to Start the FSK
Modulation Test
Select This Button
With Mouse to Set
FSK Frequency