To use an external pulse generator to supply transmit data, set up the test
bench as shown in Figure 3–13.
-
Figure 3–14. FSK Output From Transmitter With an External Modulation
Note:
This is FSK modulation with f 1 equal to 915.0 MHz, f 2 equal to 915.10 MHz and 1000 Hz data rate.
The f 1 frequency is the 0 frequency. The f 2 frequency is the 1 frequency.
Perform the FSK modulation output test as described in the previous sec-
tion. In this new setup, an external pulse generator is providing the modu-
lation. The FSK Test button on the chip layout screen, does not need to
be pressed to start the FSK test.
Testing of Transmitter
Software User's Guide