Assa Abloy Corbin Russwin IN120 WiFi Installation Instructions Manual page 9

IN120 Mortise Lock
4. Lock Handing Instructions
a. Move the Red locking screw to side of lock-body
being locked (Fig. 1)
b. Push in latch then depress catch plate with screw
driver (Fig. 1)
c. Pull latch out of lock-body and turn latch over (Fig. 2)
Figure 2
d. Push in latch while holding screw driver
behind latch tail (Fig. 3)
Note: Push in latch until catch plate is no
longer depressed (Fig. 4)
e. Rotate lock front to match bevel of door
as shown (Fig. 5)
Figure 5
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
RED Locking Screw
9
Figure 1
MAKE SURE CATCH PLATE IS
EVEN W/ TOP SURFACE
GOOD
Figure 4
WARNING:
LOCK-IN CAN
OCCUR IF LATCH
IS NOT PROPERLY
Figure 3
INSTALLED
Catch Plate
BAD