Assa Abloy Corbin Russwin IN120 WiFi Installation Instructions Manual page 19

IN120 Mortise Lock
11. Install Inside Module Component Assembly
1. Insert top tabs of controller into slots on mounting plate (Fig. 17).
2. Ensure proper alignment of board-to-board connectors while pivoting bottom of controller
toward door until tab on bottom snaps securely into place on mounting plate.
CAUTION: To avoid possible damage to board-to-board connectors, care should be taken
when securing controller to mounting plate. If there is resistance when securing,
detach controller to determine cause before re-attaching controller.
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
Fig. 17
19