Assa Abloy Corbin Russwin IN120 WiFi Installation Instructions Manual page 17

IN120 Mortise Lock
9. Install Outside (Reader) Escutcheon - (Continued)
d. Next feed the cables/connectors through the inside mounting assembly (and gasket if required*).
e. Secure the mounting assembly while ensuring proper alignment of outside reader and tighten the
(2) through-bolts on the inside of the door to secure the reader (Fig. 15b).
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
Inside Face of Door
Gasket*
Ground Lug
*Gasket is required for outdoor installations.
Do not use gasket for fire-rated openings.
If installing with gasket; separate gasket from mounting plate to
feed cables/connectors through holes as indicated (Fig. 15b).
Once cables/connectors are fed through, reattach gasket to
mounting plate.
Fig. 15b
17
NOTE: Cable lengths exaggerated for illustrative purposes.
Mounting Plate
Through -
bolt
DPS
Reader Harness
Through -
Lock Body
Harness
bolt