IN120 Mortise Lock
3.
Install Door Position Switch* (DPS)
a. Push wires through raceway toward lock prep.
b. Push DPS firmly into place by hand.
Note: DO NOT TAP SWITCH WITH ANY TOOL.
c. Install magnet into door frame. Push firmly into place by hand.
See instruction A7983.
*
Only required on the ML201xx lock body (ML202xx has an integrated DPS)
CAUTION: if DPS is not installed or is installed
improperly, door status monitoring features will
not function.
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
Collar is used only
with metal doors
Door Status Switch
8
Inside of Door