IN120 Mortise Lock
7b.
Install Museo
Step 1 Thread adapter plate hub into
lever and fully tighten
NOTE: Spindle can
be used to help
thread hub into lever
Adapter Plate Hub
Step 3
Install O/S trim assembly and inside adapter plate
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
®
Trim:
Fig. 12a
Outside Face of Door
Step 2
Align adapter plate hub with square
hole in lever; keeping hub as tight
as possible
Fig. 13
Use Correct Spindle Orientation
BAD
13
Fig. 12b
Inside Face of Door
GOOD
Lever