IN120 Mortise Lock
Step 4
Install Spindle and Rose:
a. Align studs on rose with bushings in adapter plate.
Step 5
Install I/S lever with set screw:
Step 6
Install Armored Front:
a. Tighten (2) screws through lock body.
b. Attach armored front with two #8 x ¼" screws (Fig. 14c).
Copyright © 2016 Corbin Russwin, Inc., an ASSA ABLOY Group company.
All rights reserved. Reproduction in whole or in part without the
express written permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
Fig. 14a
Outside Face of Door
Fig. 14b
14
Fig. 14c