Electrical Safety - Molecular Devices ImageXpress Pico Installation Manual

ImageXpress Pico Personal Imaging System Installation Guide

Electrical Safety

To prevent electrically related injuries and property damage, inspect all electrical equipment
before use and immediately report all electrical deficiencies. Contact Molecular Devices
Technical Support to service equipment that requires the removal of covers or panels.
Do not remove the instrument covers. To prevent electrical shock, use the supplied power
cords only and connect to a properly grounded wall outlet.
To ensure sufficient ventilation and provide access for disconnecting power from the
instrument, maintain a clearance of 20 cm to 30 cm (7.9 in. to 11.8 in.) at the rear of the
instrument.
Power off the instrument when not in use.
If the instrument does not power on, you may need to replace the instrument fuses. See
Replacing Fuses on page 9
8
WARNING! HIGH VOLTAGE.
electrical shock hazard existing from a high-voltage source. Read and understand
all safety instructions before you install, maintain, or service the instrument.
for details.
Within the instrument is the potential of an
5063666 F