Connect The Camera To The Computer; Turn The Camera On/Off; Access The Camera Settings; Check That Dual Streaming Is Installed - FLIR E Series User Manual

5
Setting up the screening station

5.6.2 Connect the camera to the computer

Note For connection of the camera to the computer, you should use the USB cable
with power adapter. This is needed to provide the camera with enough power for continu-
ous operation.
1. Open the cover at the top (FLIR Exx) / bottom (FLIR T5xx/T8xx) of the camera. Con-
nect the USB cable to the USB-C connector in the camera.
2. Connect the USB cable to the computer.
3. Connect the USB cable power adapter to a power outlet.

5.6.3 Turn the camera on/off

• To turn on the camera, push the on/off button
• To turn off the camera, push and hold the on/off button

5.6.4 Access the camera settings

1. Tap the menu system button
menu system.
2. Tap (Settings). This displays the Settings menu.

5.6.5 Check that dual streaming is installed

For efficient use of the FLIR Screen EST application, the camera must have support for
dual video streaming.
To check if the FLIR Dual Streaming option is installed, select
settings > Camera information. Check that "dual_stream" is included under Model
options.

5.6.6 Configure the camera

For safety reasons and for accurate screening results, some important settings are
needed in the camera.
Note Laser and autofocus are not supported by all camera models.
1. The laser must be disabled. The laser beam can cause eye irritation.
Disable the laser by selecting
able all.
2. The camera temperature range shall be set to the temperature range that includes
human skin temperatures; 30 to 45°C (86 to 113°F).
Check the camera temperature range by selecting
ture range.
3. Continuous autofocus shall be disabled. The focus shall be adjusted manually before
starting the screening and must not be changed.
Disable continuous autofocus by selecting
> Continuous autofocus > Off.
4. The autofocus method for shall be set to Contrast (not to Laser).
Select (Settings) > Device settings > Focus > Auto focus and then select
Contrast.
#T810558; r. AB/67023/67023; en-US
.
for more than 0.5 second.
at the bottom of the screen. This displays the
(Settings) > Device settings > Lamp & laser > Dis-
(Settings) > Camera tempera-
(Settings) > Device settings > Focus
(Settings) > Device
13