5
Setting up the screening station
Part number
Part
T300342
FLIR Screen EST, Perpetual license
T300344
EST Camera kit (FLIR Exx/T5xx/T8xx)
The kit includes the following:
•
T850111: Option, Dual streaming
•
T911846: USB 2.0 A to USB Type-C with Power adapter
5.3 Prepare the screening station
5.3.1 Choose the site
• The screening station needs a floor area of approx. 1.5 x 3.3 m (5 x 11 ft.) plus the
queue area.
• For important factors related to the area around the screening station, see section
3.3.2 Environmental considerations.
• Decide where the visitor display and camera shall be placed and how they shall be
mounted.
• Consider personal integrity matters; e.g. if the visitor display should be hidden from
others than the screened person.
• Decide where the computer shall be placed, preferably so that the operator can view
the screening station and also be of guidance to the screened persons.
5.3.2 Secure power supply
Power outlets are needed for the following equipment:
• USB cable with power adapter (connected to the camera).
• Computer.
• Visitor display.
• Optional: Operator display.
5.3.3 Solve the queue management
• Plan how the persons will flow into the screening station and out, both in low and high
flow periods, and enable queueing.
• Plan for any alternative routes:
◦ after an alarm
◦ for any questions
◦ for persons in a wheelchair or with other special requirements
5.4 Prepare the computer
Note The operating system of the computer must be Microsoft Windows 10.
5.4.1 Install the FLIR Screen EST application
To install the FLIR Screen EST application on the computer, follow this procedure:
1. Download the FLIR Screen EST installer package from
https://support.flir.com/screenest.
2. To start the installation, double-click the executable installer file.
3. Read and accept the license terms and conditions.
4. Click Install.
5. Click Finish.
6. Run the application from the Start menu or by double-clicking the desktop icon.
7. The FLIR Screen EST dialog box appears where you can activate your license key.
Note To complete the installation, the computer may need to be restarted. Follow the
instructions on the screen.
#T810558; r. AB/67023/67023; en-US
11