Table of Contents
Advertisement
10.4
ibaClock - "Diagnostics" tab
Figure 14: ibaClock – "Diagnostics" tab
General
In the "General" section the version of hardware, firmware and FPGA is displayed as well
as the serial number of the device.
Write firmware
Using the <Write firmware> button, it is possible to run firmware updates. Select
the update file „clock_v[xx.yy.zzz].iba" in the browser and start the update with
<OK>.
Important note
This procedure can take a few minutes and must not be interrupted.
Reset to factory defaults
With the button <Reset to factory defaults>, any settings are reset to the default set-
tings having confirmed the following query with <Yes>.
Then you will receive the following notification:
40
Manual
Issue 1.4
ibaClock
Advertisement
Table of Contents
