System Requirements; Hardware; Software - IBA ibaClock Manual

5

System requirements

5.1

Hardware

 External time source:
 "Trimble
 Time code IRIG-B
 PTP (IEEE 1588), E2E and P2P
 Pre-assembled antenna cable for a point-to-point-connection from the antenna to
the device
 Connection to an ibaPDA system: 2 fiber optic patch cable for a bidirectional fiber
optic connection to one of the following ibaFOB cards in the ibaPDA computer:
 ibaFOB-io-D
 ibaFOB-2io-D
 ibaFOB-2i-D, optionally with extension module ibaFOB-4o-D
 ibaFOB-4i-D, optionally with extension module ibaFOB-4o-D
 ibaFOB-io-ExpressCard
The firmware of the ibaFOB-D-card must eventually be upgraded to a state D3 or
higher for the use of ibaClock. Please contact the iba support in case of a required
firmware update.
 Connection to a standard computer: standard Ethernet cable
5.2

Software

 ibaPDA, version 6.34.0 and higher
 Web browser for configuration and diagnosis via the web interface of the device
10
Acutime™ GG" or "Trimble
®
Manual
Acutime™ 360" GPS smart antenna
®
Issue 1.4
ibaClock