Ibaclock - "General" Tab - IBA ibaClock Manual

Time synchronization module for ibapda systems

Table of Contents

10.2

ibaClock - "General" tab

Figure 12: ibaClock – "General" tab

Basic settings

 Module Type

Display of the module type, cannot be changed.

 Locked

True:

False: the module can be changed by all users.

 Enabled

The data acquisition for this module is either enabled or disabled.

 Name

Here you can assign a name for the module.

 Time base

Time base for the data acquisition that is used for this module.

 Use name as prefix

IF TRUE is selected, the module name is put as prefix in front of the signal name of

this module.

Connection

 IP address

The IP address is determined by the slot, the link number of the FOB card and the

device number which is set on the device. ibaPDA sends configuration data and

reads diagnosis data over the TCP/IP connection which is realized in the FO proto-

col. This IP address cannot be changed.

 Auto enable/disable

If the value is TRUE, the data acquisition is started even though the device is miss-

ing. The missing device is temporarily disabled in the configuration. During the

the module can be changed by authorized users only.

Manual

Issue 1.4

ibaClock

Table of Contents