Update Via Ibapda; Module Information / Diagnostics; Diagnostics; Webinterface - IBA ibaMS16xAO-10V/-20mA Manual

8.3.2

Update via ibaPDA

 Open the ibaPDA I/O Manager and choose your iba-modular system in the tree
structure.
 On the "Diagnostics" tab, click on the <Write firmware> button and choose the
„padusit2x16_v[xx.yy.zzz].iba" or „paduscm_v[xx.yy.zzz].iba" update file.
 You start the update by clicking on <OK>.
Figure 5: Update via ibaPDA
8.4

Module Information / Diagnostics

8.4.1

Diagnostics

Important information about the iba-modular system, like hardware version, firmware ver-
sion, FPGA version and serial number is displayed in the "Diagnostics" tab. Open the
ibaPDA I/O Manager and choose your iba-modular system in the tree structure (See also
figure above)
8.4.2

Webinterface

On the module Website, general information about the module is only displayed. You
cannot change the values.
Important note
The Web interface is available only with the central unit ibaPADU-S-IT-2x16.
18
Manual
Issue 1.4
ibaMS16xAO-10V/-20mA