Iba Applications; Configuration In Ibapda; General Settings - IBA ibaMS16xAO-10V/-20mA Manual

9

iba Applications

9.1

Configuration in ibaPDA

You can configure the signals with the I/O Manager of ibaPDA. If the iba-modular system
is already installed and you want to add a new module, click on „Read configuration from
device". The module will be detected automatically.
Figure 8: Automatic detection of the module
Note
The automatic detection requires a bidirectional FO connection from the ibaPDA com-
puter to the central unit.
Other documentation
If you want to install the iba-modular system at first, refer to the manual of the central unit,
chapter "Configuration with ibaPDA".
9.1.1

General settings

If the module is detected, click on the module in the signal tree and the „General" tab
appears.
Figure 9: ibaMS16xAO-10V – "General" tab
Basic settings
 Module Type
Display of module type (read only)
20
Manual
Issue 1.4
ibaMS16xAO-10V/-20mA