Loading Configuration Data - Huawei EchoLife OT925-G User Manual

EchoLife OT925-G
User Guide
Click Backup Settings to display the download dialog box.
Click Save .
Select the path for saving the backup file backupsettings.conf , and then click Save .
----End

4.2.2 Loading Configuration Data

This section describes how to load the configuration file on the PC to the OT925-G.
Context
The size of the configuration file must not be larger than 64 KB.
The file name and loading path must not contain more than 128 characters.
The configuration file can be loaded only when the browser enables ActiveX control. By default, the
browser enables ActiveX control.
After the configuration file is loaded, the configuration of the OT925-G by the OLT through the OMCI
will not be modified. The following configuration items will be updated:
Page
.1 shows the Update page.
.1
Procedure
Click Management > Settings > Update in the navigation tree to display the configuration
page.
Click Browse... to display the save dialog box.
Click Update Configuration to reboot the device. The configuration takes effect only after the
rebooting.
Issue 02 (2007-08-30)
Port working mode and local transparent transmission
Multicast VLAN and IGMP mode
GPON trust mode and map mode
TDM impedance
Obtaining mode of IP address, IP address, subnet mask, and IP address of
the gateway
User password
Update page
Huawei Technologies Proprietary
Tables
lxxiv