Logging Onto The Device - Huawei EchoLife OT925-G User Manual

EchoLife OT925-G
User Guide
3.2

Logging Onto the Device

This section describes how to log onto the Web interface of the OT925-G.
Context
Before logging onto the device, make the following preparations:
After logging onto the device, you will have to enter the user name and password again if the PC is
idle for over 10 minutes.
Procedure
Enter the IP address of the OT925-G in the address bar of the browser.
In the displayed dialog box, enter the user name and password. Both of them are "admin" by
default.
Click OK .
After the authentication, the browser displays the home page of the OT925-G.
----End
Issue 02 (2007-08-30)
Use a network cable to connect the OT925-G to a PC.
Power on the OT925-G and the PC.
Configure the IP address of the PC and that of the OT925-G in the same
network segment. The default IP address of the OT925-G is 192.168.1.1, with
the subnet mask 255.255.255.0. You can configure the IP address of the PC
as 192.168.1.2.
If you have any problems during the configuration, contact your carrier for
help.
Huawei Technologies Proprietary
Tables
xlii