EchoLife OT925-G
User Guide
.3
Drilling holes
Insert two expansion bolts vertically to the holes, and knock them into the holes with the rubber
hammer, as shown in .4 .
.4
Installing expansion bolts
Face the cable connecting side of the device downward. Align two holes on the upper parts of
two mounting brackets to the expansion bolts in the wall. Adjust the position of the OT925-G,
and then screw the flat washer, spring washer, and nut onto each bolt, as shown in .5 .
Issue 02 (2007-08-30)
Huawei Technologies Proprietary
Tables
xxviii