Wall Mounting - Huawei EchoLife OT925-G User Manual

EchoLife OT925-G
User Guide
Select the position in the cabinet for installing the OT925-G, and then install captive nuts
according to the chassis position.
Use four panel screws to fasten the OT925-G to the selected position in the cabinet through the
mounting brackets, as shown in .2 .
.2
----End

2.3.2 Wall Mounting

This section describes how to mount the OT925-G onto the wall.
Precautions
Issue 02 (2007-08-30)
Installing the OT925-G in a cabinet
Ensure that the subscriber cables and optical fibers are long enough to reach
the nearest MDF.
Select suitable expansion bolts. Here, M6 expansion bolts are recommended.
Select a best installation position according to the requirements on installation
environment, taking power supply location and maintenance requirements
into account. It is recommended that the OT925-G is mounted onto the wall
1.7–2.5 m high from the ground.
It is forbidden to put any flammable or explosive materials under the
OT925-G.
Huawei Technologies Proprietary
Tables
xxvi