Querying Arp Information - Huawei EchoLife OT925-G User Manual

EchoLife OT925-G
User Guide

4.1.3 Querying ARP Information

This section describes how to query the Address Resolution Protocol (ARP) information of the
OT925-G.
Context
The ARP is used to resolve IP address into Media Access Control (MAC) address.
If two PCs on the network need to communicate with each other, they must know each other's
physical address, that is, MAC address. IP address is the PC address on the network layer. If the
packets on the network layer need to be sent to the destination PC, the physical address of the
destination PC must be obtained. Therefore, the IP address must be resolved into MAC address.
Here, the ARP protocol is required.
Page
.1 shows the ARP page.
.1
Issue 02 (2007-08-30)
Parameter
Sn Send Times
BER Interval
BIP Error
Tx Power Level
PST Line Number
Key Index
REI Seq-Number
DN FEC Enable
BER interval time
FEC-based AES Plain Text
Calculating Mode
ARP page
Huawei Technologies Proprietary
Parameter Description
Sending times of serial number.
Bit error rate (BER) interval.
Bit-interleaved parity (BIP) error.
Transmitting optical power level.
PON section trace (PST) line number.
Key index.
Remote error indication (REI) sequence number.
Status of the downlink forward error correction (FEC).
Bit error ratio (BER) interval time.
FEC-based advanced encryption standard (AES) plain
text calculating mode.
Tables
lxiii