Huawei EchoLife OT925-G User Manual page 50

EchoLife OT925-G
User Guide
Procedure
Click Advanced Setting > Lanswitch > Port in the navigation tree to display the configuration
page.
Select a desired working mode for the port from the Port Mode list.
Click Disable Local Exchange to configure the local exchange function of the port.
----End
Parameter Description
Parameters of the Port page
Issue 02 (2007-08-30)
By default, the local exchange function is enabled. Click Disable Local
Exchange to disable the local exchange function between ports. After the
local exchange function is disabled, the Disable Local Exchange button
becomes Enable Local Exchange.
The configuration modification takes effect immediately. To save the
configuration, click Management > Save/Reboot in the navigation tree,
and then click Save/Reboot in the right pane to reboot the device.
Parameter Parameter Description
Port Ports of the OT925-G, including four 10/100BaseT ports, one
100/1000BaseT port, and one IP Host port.
Port Status The current status of the port. It is automatically adjusted according
to the connected device.
Native VLAN The default VLAN ID of the port. When a frame passes a port, VLAN
ID of the frame will be specified as the native VLAN ID if the VLAN for
the frame cannot be identified.
VLAN Pri VLAN priority, that is, the priority of the Native VLAN. VLAN Pri has
levels 0–7, and level 7 is the highest level.
Port Mode Port working mode.
Auto: automatic negotiation
10MHalf: 10 Mbit/s half-duplex
10MFull: 10 Mbit/s full-duplex
10MHalf: 100 Mbit/s half-duplex
10MFull: 100 Mbit/s full-duplex
Changeless: stable and unchangeable
Huawei Technologies Proprietary
Tables
xliv