Importing A Project - Renesas R-IN32M3 Quick Start Manual

R-IN32M3 Module Quick Start Guide
2. e2studio Project
2.1 Installation
To use the sample projects with the e2studio, the e2studio and SSP must be installed.

2.2 Importing a Project

The example files provided by Renesas in the software for the R-IN32M3 Module starter kit can be imported
into the e2-studio integrated system development environment (ISDE). In the [File] dropdown menu, use the
[Import] dialog box of the e2studio to import the archive with its projects located in the unpacked project
delivery into e2studio. Under [General], chose [Existing projects into workspace] when prompted for the
import type. This will create new projects in the e2-studio.
Figure 2.1 e2studio Import Dialog
In the next step, the root directory of the existing archive has to be selected by using the [Browse...] button.
To select the directory of the unpacked archive, make sure that all projects for importing are selected in the
checkboxes, and finish importing by clicking on [Finish] as shown in the figure below. In this example, the
unpacked archive files are located in the directory "C:\Renesas\_exampleSW".
R12QS0043ED0100 Page 9 of 24
Aug 03, 2020