R-IN32M3 Module
Quick Start Guide
3.1 Device Detection
Connect the R-IN32M3 Module to the PC, and then execute the scan network.
Scan Network
Figure 3.2 Management Tool Network Scan
To communicate with the R-IN32M3 Module, open the "Networks" list in [Network Navigator]. Then, chose
the network interface where the R-IN32M3 Module is reachable. Select the [Scan Network] button in the
toolbar.
The following dialog appears and 1 found device will be reported.
Figure 3.3 Scan Network Dialog
R12QS0043ED0100
Page 15 of 24
Aug 03, 2020