Project Import - Renesas R-IN32M3 Quick Start Manual

R-IN32M3 Module Quick Start Guide
2.3.5 WinPcap
To use the functionality of the Management Tool, the WinPcap needs to be installed. WinPcap can be found
at https://www.winpcap.org
The Npcap also supports the Management Tool, if you have enabled "Winpcap API-compatible Mode" when
installing Npcap. Npcap can be found at https://nmap.org/
2.3.6 Wireshark
The Management Tool also offers a function to create a log file of all relevant parameters of R-IN32M3
Module. For a more detailed protocol analysis it is recommended to install the Wireshark tools. The
Wireshark tools is freeware and can be downloaded at https://www.wireshark.org.
3. e2studio Project
3.1 Installation
To use the sample projects with the e2studio the correct version of e2studio and SSP must be installed.

3.2 Project Import

The example files provided by Renesas with R-IN32M3 Module starter kit SW (see chapter "5.Examples")
can be imported into the e2-studio ISDE. In the "File" dropdown use the import dialog of e2studio to import
the archive with its projects located in the unpacked project delivery into e2studio. Under "General" chose
"Existing projects into workspace" when prompted for import type. This will create new projects in e2-studio.
Figure 6: e2studio Import dialog
In the next step the root directory of the existing archive has to be selected by use of the "Browse..." button.
Select the directory of the unpacked archive, make sure that all projects are selected in the check-boxes for
import and "Finish" import as shown in the figure below. In this example, the unpacked archive files are
located in the directory "C:\Renesas\_exampleSW".
R12QS0038EE0100 Page 1-6
Jan.27.2020