Device Detection - Renesas R-IN32M3 Quick Start Manual

R-IN32M3 Module
4. Management Tool
The Management Tool allows development related configuration and management of the Renesas sample
application. This management is based on a UDP broadcast communication. Thus, it works independently
from IP settings of the management PC and R-IN32M3 Module.
Figure 15: Management Tool main window
This tool is organized in panels.
⎯ The "Network Navigator" shows a list of available networks.
⎯ The panel "Messages" shows information regarding actions.
⎯ The panel "Outline" shows additional information depending on the selected function panel.
Following function panels are available:
Panel
PNIO Master
Device Log
Config Manager
Firmware Update
EtherNet/IP Master
Exception Log

4.1 Device Detection

At first a communication needs to be established with R-IN32M3 Module. Thus, connect R-IN32M3 Module
to the Ethernet network connector of the PC. Between the management PC and R-IN32M3 Module a
R12QS0038EE0100
Jan.27.2020
Function
Simple PROFINET IO master functionality
Shows log messages of the running application
from both the embedded CC of R-IN32M3 Module
and AC on the Synergy board.
Provides access to the config manager variables of
R-IN32M3 Module.
Allows update of the firmware in R-IN32M3 Module.
Simple EtherNwet/IP master functionality
not in scope of this manual
Quick Start Guide
Page 1-11