Figure 7-12 Edit Mode Reboot Indicator; Figure 7-13 Value Change Rending Indicator; Figure 7-14 Invalid Entry Highlighted; Figure 7-15 Invalid Entry Explanation Window - Siemens VIU-20 Installation And Instruction

VIU WEB BROWSER USER INTERFACE
_________________________________________________________________________________________________________
When the vital edit mode is selected, the Edit Mode button changes to Reboot, the text fields
for the vital parameters are enabled and a lightning bolt icon appears to the right of the globe
icon at the top of the screen. The Vital Core Status and Vital Slave Session icons will also
alternate between the unlocked padlock and the caution symbol while in vital edit mode.
Lightning bolt icon

Figure 7-12 Edit Mode Reboot Indicator

After changing the vital parameters the system must be rebooted by selecting the Reboot
button. The Reboot button will reboot the vital core only, not the entire system. A reboot is the
only way to remove the VIU from Edit Mode. When the reboot button is pressed a command is
given to the Vital Core requesting a reboot which removes the VIU from Edit Mode. Following a
reboot, the lightning bolt icon is removed from the screen.
Several screens contain multiple tabs for the parameters. If a parameter value is changed on a
tab and another tab is selected without saving the new value, the tab with the unsaved change
will display an asterisk (*) to the right of the tab name. After the values are saved, the asterisk
goes away.

Figure 7-13 Value Change Rending Indicator

If an invalid entry is made in a data field and the Save button is pressed, the data field will be
outlined in red and the save process will be halted.
Hover the cursor over the data field with the bad entry and a message will appear explaining the
limits for the entry.

Figure 7-14 Invalid Entry Highlighted

Figure 7-15 Invalid Entry Explanation Window

7-5
SIG-00-07-11 SEPTEMBER 2012 (REVISED OCTOBER 2019)
Version No.: B.2