_________________________________________________________________________________________________________
Figure 7-24 Ethernet Configuration Screen (Port Two Tab)
7.3.5.9
DHCP Configuration (Port 2)
Select whether the Port 2 DHCP client is enabled.
Port 2 DHCP Client enabled options: checked, not checked.
Default is checked.
7.3.5.10
IP (Port 2)
Enter the Port 2 IP address.
IP range: 0.0.0.0 – 255.255.255.255 (default is 192.168.3.100).
7.3.5.11
Gateway (Port 2)
Enter the Port 2 IP address.
Gateway address range: 0.0.0.0 – 255.255.255.255 (default is 192.168.3.1).
7.3.5.12
Network Mask (Port 2)
Enter the Port 2 network mask.
Gateway address range: 0.0.0.0 – 255.255.255.255 (default is 255.255.255.0).
7.3.6 Event Log Configuration
The Event Log configuration screen is shown in Figure 7-25.
SIG-00-07-11
Version No.: B.2
VIU WEB BROWSER USER INTERFACE
7-17
SEPTEMBER 2012 (REVISED OCTOBER 2019)