View Button Menu; Figure 6-10 List Of Networked Viu Devices - Siemens VIU-20 Installation And Instruction

DIAGNOSTIC TERMINAL (DT) SOFTWARE
_________________________________________________________________________________________________________
If several VIUs are connected to a Local Area Network (LAN), connect the PC to this network
and then select the Discovery Protocol Enabled check box (Figure 6-9B). The DT will locate
each VIU on the LAN and present them in a list (Figure 6-10). Select the desired VIU from the
list. This screen refreshes approximately every 15 seconds.

Figure 6-10 List of Networked VIU Devices

6.6

VIEW BUTTON MENU

Click the VIEW button at the top of the Input Status Screen to
display the View drop-down menu.
6-9
SIG-00-07-11 SEPTEMBER 2012 (REVISED OCTOBER 2019)
Version No.: B.2