Minimum And Maximum Monitoring; Fuse Monitoring; Table 5-7. Minimum And Maximum Conditions - Advanced Energy Thyro-PX Series User Manual

®
Advanced Energy
selecting the status line. Simultaneously with the fault signal, you can use the Pulse
Lock On/Off (with acknowledgement), Pulse Lock On/Off (without
acknowledgement), or Regulator Lock On/Off (without acknowledgement)
configuration to require that pulse shutdown occurs. The number and content of
occurred warnings or errors are shown in the status line of the Thyro‑Touch display.
Select a status line to retrieve the corresponding warning or error message.

Minimum and Maximum Monitoring

The following table shows the minimum and maximum conditions that can be
monitored using the Thyro-Tool Pro software.
Table 5‑7. Minimum and maximum conditions
Symbol
UMainMin
UMainMax
Ueff_Min
Ueff_Max
U_min
U_Max
Ieff_Min
Ieff_Max
I_Min
I_Max
Ip_Max
P_Min
P_Max
R_Min
R_Max
T_Min
T_Max

Fuse Monitoring

Open semiconductor fuses are detected and indicated.
57010148-00G
Minimum mains voltage
Maximum mains voltage
Minimum rms voltage
Maximum rms voltage
Minimum rectified voltage (average of the absolute value)
Maximum rectified voltage (average of the absolute value)
Minimum rms current
Maximum rms current
Minimum rectified current (average of the absolute value)
Maximum rectified current (average of the absolute value)
Maximum peak current
Minimum power
Maximum power
Minimum load resistance
Maximum load resistance
Minimum power controller temperature
Maximum power controller temperature
Installation, Setup, and Operation
®
Thyro-PX Power Controller
Description
5‑47