Control Types; Controlled Value; Table 5-5. Controlled Values; Figure 5-44. Control Characteristics For U Control - Advanced Energy Thyro-PX Series User Manual

®
Advanced Energy
Control
Start
Figure 5‑44. Control characteristics for U control

CONTROL TYPES

The Thyro-PX power controller has six control types effective as underlying controls.
Mains voltage variations and load changes are directly and quickly adjusted by
bypassing the slow temperature control system.
Before commissioning the power controller and selecting a control type, you should
be familiar with the application and with the operating characteristics of the load.

Controlled Value

The controlled value effect on the load is proportional to the total setpoint, depending
on the control type, as shown in the following table.
Table 5‑5. Controlled values
Control Type
P control
U control
2
U control
I control
2
I control
57010148-00G
Control
End
Setpoint
Output (active) power, P
Output voltage, U
Output voltage, U
Output current, I
Output current, I
Installation, Setup, and Operation
Thyro-PX
Control Value
(Proportional to the Total Setpoint)
RMS
2
RMS
RMS
2
RMS
®
Power Controller
5‑45