Duramaxx Angkor Manual page 15

Step 1
Take out the aluminum rod and search coil
from the packing box. Loosen the lock knob
on the lower stem, take down the bolt. In-
stall the lower stem on the search coil,and
lock it. Note: the rubber gasket must be
installed correctly.
Step 3
Press down the silver button on the upper
stem, and insert it to the middle stem.
Assembly
1 Low Stem
2 Rubber Gasket
3 Screw
4 Nut
Step 2
Take out the upper stem and control box
from the packing box. Loosen the two tri-
angle fasten screws at the bottom.
Step 4
Make the silver button on the upper stem
align at the two holes on the middle stem.
Lock the two triangle fasten screws at the
bottom and fix the control box firmly.
15